ODF 1U Optical Fiber Terminal Box Patch Panel Rack Mount type
Description:
Fiber optic patch panel ,Fiber optic distribution frame, fiber
optic distribution Box, ODF ,fiber optic Indoor wall box, Fiber
optic Outdoor wall box,Optical Terminal Box (OTB) is mainly used
for connecting the indoor/outdoor optical cables, optical patch
cords and optical pigtails.
Features:
1. Made of cold-rolling steel, static spreading-plastic, small
dimension and exquisite and easy for operation
2. The box are Rack Mounted, which is convenient to install and
dismantle
3. The splice tray could be piled one upon another, flexible to
turn
4. The curve radius of the coiled spear fibers should be guaranteed
to be over 37.5mm in the splice tray
5. The box is of unique structure, reasonable layout, and has
adequate room for operation; Adjustable clamp seal ring and
reinforce configuration, which could adjust different sizes of
cables flexibly to make sure the cables are clamp tightly
6. The indoor type is of excellent seal performance, which could
prevent water from entering effectively
Technique Performance:
1. External size 480x250x1U, 2U,
2. Fiber capacity from 12 cores to 48 cores
3. Insertion loss: <0.3dB
4. Return loss: PC< 40 dB, UPC<50dB, APC< 60dB
5. Winding radius ≥40mm
6. Working temperature -25°C~+45°C
7. Atmosphere pressure 70~106Kpa
8. Insulated Resistance 2×10MΩ/500V(DC)W
9. Voltage- resistance:Under the effect of 3kv/DC/1min,
non-puncture, and no arc-over.
Specification:
| Environmental temperature: | -25 - 55°C |
| Relative humidity: | <85%(when the temperature is below 30°C) |
| Atmosphere pressure: | 70~106Kpa |
| Insulating resistance: | >2×104 MΩ/500VDC |
| Voltage-resistance strength: | Under the effect of 15kv/DC/1min, non-puncture, and no arc-over. |
Application:
1. Widely used in FTTH access network
2. Telecommunication networks
3. CATV networks, LAN Network
4. Data communications networks
5. Local area networks
6. Active device termination
